:

Add Comment | Related Links | TrackBack
Related Content

3D Printing Miniatures at Home

Recently, I've purchased a ELEGOO Ender 3 3D printer. I put it together in less than 2 hours and have been printing on it every since. I use Cura with the defaults for CR-10 and PLA. So far, no real problems with printing miniatures and terrains.

I found that printing with 20% infill in more than enough when it comes to miniatures that requires no support. But when I print miniatures with support, sometimes the arms, legs, and other thin objects break when I try to pull off the support.

Maybe infill needs to be 100% when the miniature needs support?

What are you experiences 3D printing miniatures at home?

Gypsy
Tue, 25 Sep 2018 02:50:47 -0700

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

Add Comment

Spam Control | * indicates required field
Your Name: *
E-mail:
Remember Me!
Comment: *
File attachment is optional. Please do not attach a file to your submission unless it is relevent.
Attach File:
(5 MB Max)
Spam Protection: * Answer of 1 + 0?
Click button only once, please!

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Messages, files, and images copyright by respective owners.